100W AC to DC Kit Assorted KTM Husqvarna
100W AC to DC Kit Assorted KTM Husqvarna is backordered and will ship as soon as it is back in stock.
Couldn't load pickup availability
Delivery and Shipping
Delivery and Shipping
Products marked as "In Stock" are stored in our different distribution centers. These products will ship within 2-5 business days. Orders are not shipped or delivered on weekends or holidays.
Items are then sent by courier, we use Courierpost & Posthaste which will take 1-3 days to arrive depending on your location and the size of the parcel.
While we will do our best to ship from the distribution center closest to you, not all items will always be in stock in every location at all times. In some cases we will split the order and ship each package out to you individually and in other cases we may need to consolidate the items in one location to ship out as one package. We utilize our best judgment in an attempt to get the products to you as quickly as possible.
You will receive a Shipment Confirmation email once your order has shipped containing your tracking number(s). The tracking number will be active within 48hours.
Returns
Returns
Our returns policy lasts 21 days. If 21 days have gone by since your purchase, unfortunately we can’t offer you a refund or exchange.
To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging.
Additional non-returnable items:
- Gift cards
- Downloadable software products
- Any Electrical products
- Some health and personal care items
- Any product from the "Second Life" category or any product in the category "Used" by NZBike Tour and Rental , NZBike Accessories or NZBike Workshop
To complete your return, we require a receipt or proof of purchase.
Please do not send your purchase back to the manufacturer.
There are certain situations where only partial refunds are granted (if applicable)
- Any item not in its original condition, is damaged or missing parts for reasons not due to our error
Description
Description
100W DC Converted Kit Stator + Voltage Regulator + Harness
- 100-watt DC charging system
- Replaces the OEM stator with a 100W high-output stator
- Converts the AC system into a high-power DC system
- All products are tested before shipping
Product images are accurate. If unsure, compare the items with your original parts before ordering.
Brand New Aftermarket Stator
- High-grade lamination materials
- High-grade copper windings resistant to temperatures up to 200°C
- Connectors included
- Rubber grommet included
An opposite connector (main harness side) is included, as original connectors are often melted, corroded or defective and can cause recurring electrical issues.
Brand New Aftermarket Voltage Regulator Rectifier
- No assembly required
- Higher-grade electrical components
- Connectors included
- Quality exceeds OEM equipment
Before Installing the New Stator
- Check the AC output of the stator.
- Replace any burned or corroded connectors on the stator and regulator rectifier.
- Check and repair any melted wiring.
- Apply high-temperature dielectric grease to all connectors.
The stator may use a different wire colour code from the original part. All wires are installed in the correct order; do not change the wiring configuration. This stator is designed as a direct plug-in replacement. Always use thread-locking compound when securing the stator. If the stator includes a pickup coil, check the air gap during installation. Set it as close as possible, but no less than 0.010".
Before Installing the New Voltage Regulator Rectifier
- Check the AC output of the stator.
- Replace any burned or corroded connectors on the stator and regulator rectifier.
- Check and repair any melted wiring.
- Apply high-temperature dielectric grease to all connectors.
Warning
Risk of electric shock. Disconnect the battery before servicing. Ensure proper installation by a qualified technician to avoid malfunction.
Stator Specifications
Dimensions:
- Interior diameter: 29 mm
- Exterior diameter: 83 mm
- Thickness: 13 mm
- Stator-to-grommet wire length: 60 mm
- Grommet-to-plug wire length: 490 mm
Other Specifications:
- Number of wires: 4
- Number of plugs: 3
- Number of pins: 4
- Number of poles: 8
- Alternator resistance (white to yellow): 0.5 ohms ±20%
- Source resistance (white/red to black/red): 30 ohms ±20%
Regulator Rectifier Specifications
Dimensions:
- Width: 54 mm
- Length: 80 mm
- Height: 22 mm
- Wire length: 235 mm
- Mounting hole centre-to-centre distance: 65 mm
Other Specifications:
- Number of plugs: 3
- Number of pins: 5
- Number of wires: 5
- Minimum charging voltage: 14.5 V ±0.5 V
- Maximum charging current: 50 A / 500 W
- Open circuit voltage: Less than 15 V
- Operating temperature: -20°C to 85°C
Harness Specifications
- Wire length: 80 mm
- Number of wires: 4
- Number of plugs: 1
- Number of pins: 4
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.











